How to install the Pinogy Point of Sale software
- Daniel Gowen
- ashlynn.hawkins
This article is for anyone who needs to know how to install the Pinogy Point of Sale software. The example screenshots will be from Windows. The Mac version will look the same except for the Mac default window buttons.
To start you will need to download the software.
The Windows download is located at https://pinogy.com/downloads/Pinogy-POS-Installer.msi
The Mac installer is located at https://pinogy.com/downloads/Pinogy-POS-Installer.pkg
The installation windows will be as follows :
After you click Finish the Setup Wizard will start. It will ask for the email address and password used to signup with Pinogy. If you do not know it check with the store owners or with Support (877-360-7381) as we keep a record of those to assist with installations. Once entered in click on Sign In.
If you have not created an account with Pinogy, click +Create New Account at the bottom and complete the signup.
After clicking the Sign In button it should continue to ask for the Device Name and if this account has multiple locations there will be a drop-down to Select a location. Choose the location if needed and then click Next.
You should then get a window labeled Finish. Click Finish.
After clicking Finish the software will be installed and you can open the different components of the software.
Ensure the following are done before finishing a call after reinstalling the POS.
If this is a computer that the software will be used as a register then the receipt printer will need to be set and the pinpad will need to be linked to the register.
Also to assign the correct Tray
If you have any questions please call us at 877-360-7381.